AMD Catalyst kernel 3.11.3-201.fc19.x86_64

Nessuna risposta
Ritratto di Lang
Lang
(Newbie)
Offline
Newbie
Iscritto: 11/10/2013
Messaggi: 1

Salve a tutti,
su fedora 19, 64 bit, dopo l'ultimo aggiornamento al kernel 3.11.3-201.fc19.x86_64, kmod e akmod catalyst xorg-x11-drv-catalyst tutti alla versione 13.9.2fc19,
non riesco ad avviare un gioco che necessita di accelerazione 3d.
Il sistema è stabile e funziona normalmente (con xfce), ma avviando l'applicazione da terminale non accade nulla.

ocalhost ~]$ /run/media/skywalker/c7c5b6d6-eda4-4cac-ae44-26fff88338b7/skywalker/regnum/rolauncher
[skywalker@localhost ~]$ 

Secondo me non carica i moduli catalyst all'avvio:

Citazione:

[skywalker@localhost ~]$ uname -r
3.11.3-201.fc19.x86_64
[skywalker@localhost ~]$ lspci -v

02:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Park [Mobility Radeon HD 5430/5450/5470] (prog-if 00 [VGA controller])
Subsystem: Acer Incorporated [ALI] Device 033e
Flags: bus master, fast devsel, latency 0, IRQ 46
Memory at d0000000 (64-bit, prefetchable) [=256M]
Memory at cfee0000 (64-bit, non-prefetchable) [=128K]
I/O ports at 2000 [=256]
[virtual] Expansion ROM at cfe00000 [disabled] [=128K]
Capabilities:
Kernel driver in use: fglrx_pci

[skywalker@localhost ~]$

Essendo installati i pacchetti proprietari, è corretto che appaia in uso fglrx-pci?

Citazione:

[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xc0000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff880137c00000 s85568 r8192 d20928 u524288
[ 0.000000] pcpu-alloc: s85568 r8192 d20928 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 997015
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.11.3-201.fc19.x86_64 root=/dev/mapper/vg_skywalker-lv_root ro rd.md=0 rd.dm=0 rd.lvm.lv=vg_skywalker/lv_swap rd.luks=0 rd.lvm.lv=vg_skywalker/lv_root vconsole.keymap=it2 rhgb quiet LANG=it_IT.UTF-8 nomodeset radeon.modeset=0 rd.driver.blacklist=radeon
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Memory: 3894508K/4051456K available (6507K kernel code, 990K rwdata, 2868K rodata, 1420K init, 1540K bss, 156948K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[ 0.000000] NR_IRQS:8448 nr_irqs:712 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 16252928 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.001000] tsc: Detected 2128.012 MHz processor
[ 0.000004] Calibrating delay loop (skipped), value calculated using timer frequency.. 4256.02 BogoMIPS (lpj=2128012)
[ 0.000006] pid_max: default: 32768 minimum: 301
[ 0.000043] Security Framework initialized
[ 0.000053] SELinux: Initializing.
[ 0.000064] SELinux: Starting in permissive mode
[ 0.000488] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.001493] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.001918] Mount-cache hash table entries: 256
[ 0.002139] Initializing cgroup subsys memory
[ 0.002150] Initializing cgroup subsys devices
[ 0.002152] Initializing cgroup subsys freezer
[ 0.002154] Initializing cgroup subsys net_cls
[ 0.002155] Initializing cgroup subsys blkio
[ 0.002157] Initializing cgroup subsys perf_event
[ 0.002182] CPU: Physical Processor ID: 0
[ 0.002183] CPU: Processor Core ID: 0
[ 0.002189] mce: CPU supports 9 MCE banks
[ 0.002201] CPU0: Thermal monitoring enabled (TM1)
[ 0.002212] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 6
[ 0.002318] Freeing SMP alternatives memory: 24K (ffffffff81e5c000 - ffffffff81e62000)
[ 0.003702] ACPI: Core revision 20130517
[ 0.009741] ACPI: All ACPI Tables successfully acquired
[ 0.018065] ftrace: allocating 25146 entries in 99 pages
[ 0.033503] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.043504] smpboot: CPU0: Intel(R) Core(TM) i3 CPU M 330 @ 2.13GHz (fam: 06, model: 25, stepping: 02)
[ 0.144668] Performance Events: PEBS fmt1+, 16-deep LBR, Westmere events, Intel PMU driver.
[ 0.144676] perf_event_intel: CPUID marked event: 'bus cycles' unavailable
[ 0.144679] ... version: 3
[ 0.144680] ... bit width: 48
[ 0.144681] ... generic registers: 4
[ 0.144682] ... value mask: 0000ffffffffffff
[ 0.144683] ... max period: 000000007fffffff
[ 0.144684] ... fixed-purpose events: 3
[ 0.144685] ... event mask: 000000070000000f
[ 0.159473] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.146159] smpboot: Booting Node 0, Processors #1 #2 #3 OK
[ 0.186183] Brought up 4 CPUs
[ 0.186188] smpboot: Total of 4 processors activated (17024.09 BogoMIPS)
[ 0.188850] devtmpfs: initialized
[ 0.189139] PM: Registering ACPI NVS region [mem 0xbf46f000-0xbf4effff] (528384 bytes)
[ 0.189157] PM: Registering ACPI NVS region [mem 0xbf77d000-0xbf79efff] (139264 bytes)
[ 0.190238] atomic64 test passed for x86-64 platform with CX8 and with SSE
[ 0.190266] RTC time: 6:29:30, date: 10/11/13
[ 0.190314] NET: Registered protocol family 16
[ 0.190540] ACPI: bus type PCI registered
[ 0.190544] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.190612] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.190615] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.223100] PCI: Using configuration type 1 for base access
[ 0.223261] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.223262] mtrr: probably your BIOS does not setup all CPUs.
[ 0.223263] mtrr: corrected configuration.
[ 0.224083] bio: create slab at 0
[ 0.224205] ACPI: Added _OSI(Module Device)
[ 0.224207] ACPI: Added _OSI(Processor Device)
[ 0.224209] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.224211] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.225642] ACPI: EC: Look up EC in DSDT
[ 0.230998] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.231298] ACPI: SSDT 00000000bf71ac18 003A0 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.231643] ACPI: Dynamic OEM Table Load:
[ 0.231646] ACPI: SSDT (null) 003A0 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.231762] ACPI: SSDT 00000000bf718618 005CD (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.232089] ACPI: Dynamic OEM Table Load:
[ 0.232092] ACPI: SSDT (null) 005CD (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.237914] ACPI: SSDT 00000000bf719a98 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.238304] ACPI: Dynamic OEM Table Load:
[ 0.238307] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.240749] ACPI: SSDT 00000000bf717d98 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.241106] ACPI: Dynamic OEM Table Load:
[ 0.241108] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.761146] ACPI: Interpreter enabled
[ 0.761155] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130517/hwxface-571)
[ 0.761160] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571)
[ 0.761177] ACPI: (supports S0 S3 S4 S5)
[ 0.761178] ACPI: Using IOAPIC for interrupt routing
[ 0.761215] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.761346] ACPI: No dock devices found.
[ 0.773775] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.773816] \_SB_.PCI0:_OSC invalid UUID
[ 0.773818] _OSC request data:1 8 0
[ 0.773856] \_SB_.PCI0:_OSC invalid UUID
[ 0.773857] _OSC request data:1 1f 0
[ 0.773861] acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 0.773863] acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08)
[ 0.774638] PCI host bridge to bus 0000:00
[ 0.774642] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.774644] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.774646] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.774648] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.774650] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 0.774652] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 0.774654] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[ 0.774656] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfeafffff]
[ 0.774666] pci 0000:00:00.0: [8086:0044] type 00 class 0x060000
[ 0.774685] DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics
[ 0.774772] pci 0000:00:01.0: [8086:0045] type 01 class 0x060400
[ 0.774809] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.774917] pci 0000:00:16.0: [8086:3b64] type 00 class 0x078000
[ 0.774946] pci 0000:00:16.0: reg 0x10: [mem 0xf0604000-0xf060400f 64bit]
[ 0.775035] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.775134] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
[ 0.775154] pci 0000:00:1a.0: reg 0x10: [mem 0xf0606000-0xf06063ff]
[ 0.775238] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.775313] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.775356] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
[ 0.775371] pci 0000:00:1b.0: reg 0x10: [mem 0xf0600000-0xf0603fff 64bit]
[ 0.775433] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.775493] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.775526] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
[ 0.775589] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.775649] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.775681] pci 0000:00:1c.1: [8086:3b44] type 01 class 0x060400
[ 0.775745] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.775841] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
[ 0.775861] pci 0000:00:1d.0: reg 0x10: [mem 0xf0607000-0xf06073ff]
[ 0.775948] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.776023] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.776058] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.776158] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 0.776193] pci 0000:00:1f.0: [8086:3b09] type 00 class 0x060100
[ 0.776373] pci 0000:00:1f.2: [8086:3b29] type 00 class 0x010601
[ 0.776391] pci 0000:00:1f.2: reg 0x10: [io 0x1830-0x1837]
[ 0.776398] pci 0000:00:1f.2: reg 0x14: [io 0x1824-0x1827]
[ 0.776406] pci 0000:00:1f.2: reg 0x18: [io 0x1828-0x182f]
[ 0.776413] pci 0000:00:1f.2: reg 0x1c: [io 0x1820-0x1823]
[ 0.776420] pci 0000:00:1f.2: reg 0x20: [io 0x1800-0x181f]
[ 0.776428] pci 0000:00:1f.2: reg 0x24: [mem 0xf0608000-0xf06087ff]
[ 0.776470] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.776554] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
[ 0.776569] pci 0000:00:1f.3: reg 0x10: [mem 0xf0609000-0xf06090ff 64bit]
[ 0.776588] pci 0000:00:1f.3: reg 0x20: [io 0x1840-0x185f]
[ 0.776686] pci 0000:00:1f.6: [8086:3b32] type 00 class 0x118000
[ 0.776707] pci 0000:00:1f.6: reg 0x10: [mem 0xf060a000-0xf060afff 64bit]
[ 0.776897] pci 0000:02:00.0: [1002:68e0] type 00 class 0x030000
[ 0.776910] pci 0000:02:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.776921] pci 0000:02:00.0: reg 0x18: [mem 0xcfee0000-0xcfefffff 64bit]
[ 0.776928] pci 0000:02:00.0: reg 0x20: [io 0x2000-0x20ff]
[ 0.776940] pci 0000:02:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[ 0.776969] pci 0000:02:00.0: supports D1 D2
[ 0.777011] pci 0000:02:00.1: [1002:aa68] type 00 class 0x040300
[ 0.777024] pci 0000:02:00.1: reg 0x10: [mem 0xcfedc000-0xcfedffff 64bit]
[ 0.777078] pci 0000:02:00.1: supports D1 D2
[ 0.777130] pci 0000:00:01.0: PCI bridge to [bus 02]
[ 0.777133] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
[ 0.777136] pci 0000:00:01.0: bridge window [mem 0xcfe00000-0xcfefffff]
[ 0.777140] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.777245] pci 0000:03:00.0: [14e4:1692] type 00 class 0x020000
[ 0.777268] pci 0000:03:00.0: reg 0x10: [mem 0xf0200000-0xf020ffff 64bit]
[ 0.777386] pci 0000:03:00.0: PME# supported from D3hot D3cold
[ 0.777419] pci 0000:03:00.0: System wakeup disabled by ACPI
[ 0.779925] pci 0000:00:1c.0: PCI bridge to [bus 03-04]
[ 0.779933] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 0.779940] pci 0000:00:1c.0: bridge window [mem 0xf0200000-0xf02fffff]
[ 0.779950] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf01fffff 64bit pref]
[ 0.780036] pci 0000:05:00.0: [168c:002a] type 00 class 0x028000
[ 0.780058] pci 0000:05:00.0: reg 0x10: [mem 0xf0300000-0xf030ffff 64bit]
[ 0.780169] pci 0000:05:00.0: supports D1
[ 0.780171] pci 0000:05:00.0: PME# supported from D0 D1 D3hot
[ 0.780226] pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.780235] pci 0000:00:1c.1: PCI bridge to [bus 05]
[ 0.780240] pci 0000:00:1c.1: bridge window [mem 0xf0300000-0xf03fffff]
[ 0.780311] pci 0000:00:1e.0: PCI bridge to [bus 0f] (subtractive decode)
[ 0.780319] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.780321] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.780323] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.780325] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.780327] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 0.780329] pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
[ 0.780331] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfeafffff] (subtractive decode)
[ 0.780792] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.780852] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.780915] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.780973] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 7 11 12 14 15)
[ 0.781034] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.781093] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.781153] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *7 10 12 14 15)
[ 0.781210] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.781261] ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus ff])
[ 0.781265] acpi PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 0.781267] acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08)
[ 0.781334] PCI host bridge to bus 0000:ff
[ 0.781337] pci_bus 0000:ff: root bus resource [bus ff]
[ 0.781343] pci 0000:ff:00.0: [8086:2c62] type 00 class 0x060000
[ 0.781386] pci 0000:ff:00.1: [8086:2d01] type 00 class 0x060000
[ 0.781431] pci 0000:ff:02.0: [8086:2d10] type 00 class 0x060000
[ 0.781471] pci 0000:ff:02.1: [8086:2d11] type 00 class 0x060000
[ 0.781510] pci 0000:ff:02.2: [8086:2d12] type 00 class 0x060000
[ 0.781550] pci 0000:ff:02.3: [8086:2d13] type 00 class 0x060000
[ 0.781797] ACPI: Enabled 7 GPEs in block 00 to 3F
[ 0.781804] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.781867] ACPI: \_SB_.CPBG: notify handler is installed
[ 0.781881] Found 2 acpi root devices
[ 0.782038] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.782142] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.782145] vgaarb: loaded
[ 0.782146] vgaarb: bridge control possible 0000:02:00.0
[ 0.782236] SCSI subsystem initialized
[ 0.782239] ACPI: bus type ATA registered
[ 0.782288] libata version 3.00 loaded.
[ 0.782311] ACPI: bus type USB registered
[ 0.782330] usbcore: registered new interface driver usbfs
[ 0.782338] usbcore: registered new interface driver hub
[ 0.782365] usbcore: registered new device driver usb
[ 0.782432] PCI: Using ACPI for IRQ routing
[ 0.788303] PCI: pci_cache_line_size set to 64 bytes
[ 0.788383] e820: reserve RAM buffer [mem 0x0009c400-0x0009ffff]
[ 0.788385] e820: reserve RAM buffer [mem 0xbf27c000-0xbfffffff]
[ 0.788387] e820: reserve RAM buffer [mem 0xbf3e2000-0xbfffffff]
[ 0.788390] e820: reserve RAM buffer [mem 0xbf46f000-0xbfffffff]
[ 0.788392] e820: reserve RAM buffer [mem 0xbf717000-0xbfffffff]
[ 0.788394] e820: reserve RAM buffer [mem 0xbf77d000-0xbfffffff]
[ 0.788395] e820: reserve RAM buffer [mem 0xbf7e1000-0xbfffffff]
[ 0.788397] e820: reserve RAM buffer [mem 0xbf800000-0xbfffffff]
[ 0.788493] NetLabel: Initializing
[ 0.788494] NetLabel: domain hash size = 128
[ 0.788495] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.788509] NetLabel: unlabeled traffic allowed by default
[ 0.788595] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.788600] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.790629] Switched to clocksource hpet
[ 0.796666] pnp: PnP ACPI init
[ 0.796685] ACPI: bus type PNP registered
[ 0.796755] pnp 00:00: [dma 4]
[ 0.796780] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.796806] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.796935] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.796967] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.797032] system 00:04: [io 0x0500-0x050f] has been reserved
[ 0.797035] system 00:04: [io 0xffff] has been reserved
[ 0.797037] system 00:04: [io 0xffff] has been reserved
[ 0.797040] system 00:04: [io 0x0400-0x047f] could not be reserved
[ 0.797042] system 00:04: [io 0x1180-0x11ff] has been reserved
[ 0.797044] system 00:04: [io 0xfe00] has been reserved
[ 0.797049] system 00:04: [mem 0xff800000-0xff800fff] has been reserved
[ 0.797052] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.797100] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.797171] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.797200] pnp 00:07: Plug and Play ACPI device, IDs SYN0302 SYN0300 SYN0002 PNP0f13 (active)
[ 0.797569] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.797572] system 00:08: [mem 0xfed10000-0xfed13fff] has been reserved
[ 0.797575] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.797577] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.797579] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.797582] system 00:08: [mem 0xc0000000-0xc0000fff] has been reserved
[ 0.797584] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.797586] system 00:08: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.797589] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.797591] system 00:08: [mem 0xff000000-0xffffffff] could not be reserved
[ 0.797594] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.797597] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.797737] pnp: PnP ACPI: found 9 devices
[ 0.797739] ACPI: bus type PNP unregistered
[ 0.804219] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 05] add_size 1000
[ 0.804223] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 05] add_size 200000
[ 0.804237] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.804239] pci 0000:00:1c.1: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.804245] pci 0000:00:1c.1: BAR 15: assigned [mem 0xc0100000-0xc02fffff 64bit pref]
[ 0.804248] pci 0000:00:1c.1: BAR 13: assigned [io 0x4000-0x4fff]
[ 0.804252] pci 0000:02:00.0: BAR 6: assigned [mem 0xcfe00000-0xcfe1ffff pref]
[ 0.804256] pci 0000:00:01.0: PCI bridge to [bus 02]
[ 0.804258] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
[ 0.804261] pci 0000:00:01.0: bridge window [mem 0xcfe00000-0xcfefffff]
[ 0.804264] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.804269] pci 0000:00:1c.0: PCI bridge to [bus 03-04]
[ 0.804271] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 0.804275] pci 0000:00:1c.0: bridge window [mem 0xf0200000-0xf02fffff]
[ 0.804279] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf01fffff 64bit pref]
[ 0.804284] pci 0000:00:1c.1: PCI bridge to [bus 05]
[ 0.804287] pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff]
[ 0.804291] pci 0000:00:1c.1: bridge window [mem 0xf0300000-0xf03fffff]
[ 0.804295] pci 0000:00:1c.1: bridge window [mem 0xc0100000-0xc02fffff 64bit pref]
[ 0.804300] pci 0000:00:1e.0: PCI bridge to [bus 0f]
[ 0.804647] pci 0000:00:1e.0: setting latency timer to 64
[ 0.804652] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.804654] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.804656] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.804658] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
[ 0.804660] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
[ 0.804662] pci_bus 0000:00: resource 9 [mem 0x000e0000-0x000e3fff]
[ 0.804664] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xfeafffff]
[ 0.804666] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.804668] pci_bus 0000:02: resource 1 [mem 0xcfe00000-0xcfefffff]
[ 0.804670] pci_bus 0000:02: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.804672] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff]
[ 0.804674] pci_bus 0000:03: resource 1 [mem 0xf0200000-0xf02fffff]
[ 0.804676] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf01fffff 64bit pref]
[ 0.804678] pci_bus 0000:05: resource 0 [io 0x4000-0x4fff]
[ 0.804680] pci_bus 0000:05: resource 1 [mem 0xf0300000-0xf03fffff]
[ 0.804682] pci_bus 0000:05: resource 2 [mem 0xc0100000-0xc02fffff 64bit pref]
[ 0.804684] pci_bus 0000:0f: resource 4 [io 0x0000-0x0cf7]
[ 0.804686] pci_bus 0000:0f: resource 5 [io 0x0d00-0xffff]
[ 0.804688] pci_bus 0000:0f: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.804690] pci_bus 0000:0f: resource 7 [mem 0x000d4000-0x000d7fff]
[ 0.804692] pci_bus 0000:0f: resource 8 [mem 0x000d8000-0x000dbfff]
[ 0.804694] pci_bus 0000:0f: resource 9 [mem 0x000e0000-0x000e3fff]
[ 0.804696] pci_bus 0000:0f: resource 10 [mem 0xc0000000-0xfeafffff]
[ 0.804738] NET: Registered protocol family 2
[ 0.804956] TCP established hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.805177] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.805354] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.805388] TCP: reno registered
[ 0.805398] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.805436] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.805538] NET: Registered protocol family 1
[ 0.806028] pci 0000:02:00.0: Boot video device
[ 0.806076] PCI: CLS 64 bytes, default 64
[ 0.806118] Unpacking initramfs...
[ 1.013786] Freeing initrd memory: 10400K (ffff880036ba0000 - ffff8800375c8000)
[ 1.013793] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.013796] software IO TLB [mem 0xbb27c000-0xbf27c000] (64MB) mapped at [ffff8800bb27c000-ffff8800bf27bfff]
[ 1.013880] Simple Boot Flag at 0x3e set to 0x1
[ 1.014586] Initialise system trusted keyring
[ 1.014641] audit: initializing netlink socket (disabled)
[ 1.014654] type=2000 audit(1381472970.896:1): initialized
[ 1.038900] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.040094] zbud: loaded
[ 1.040273] VFS: Disk quotas dquot_6.5.2
[ 1.040314] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.040739] msgmni has been set to 7626
[ 1.040800] SELinux: Registering netfilter hooks
[ 1.041481] alg: No test for stdrng (krng)
[ 1.041492] NET: Registered protocol family 38
[ 1.041495] Key type asymmetric registered
[ 1.041497] Asymmetric key parser 'x509' registered
[ 1.041498] Asymmetric key parser 'pefile' registered
[ 1.041547] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.041581] io scheduler noop registered
[ 1.041584] io scheduler deadline registered
[ 1.041613] io scheduler cfq registered (default)
[ 1.041737] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 1.041859] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.041873] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.041912] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[ 1.041913] vesafb: scrolling: redraw
[ 1.041916] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[ 1.042335] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90010800000, using 3072k, total 3072k
[ 1.042408] Console: switching to colour frame buffer device 128x48
[ 1.150291] fb0: VESA VGA frame buffer device
[ 1.150303] intel_idle: MWAIT substates: 0x1120
[ 1.150305] intel_idle: v0.4 model 0x25
[ 1.150306] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.151580] ACPI: AC Adapter [ADP1] (on-line)
[ 1.151659] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[ 1.152684] ACPI: Lid Switch [LID0]
[ 1.152721] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[ 1.152725] ACPI: Sleep Button [SLPB]
[ 1.152756] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 1.152759] ACPI: Power Button [PWRF]
[ 1.152824] ACPI: Requesting acpi_cpufreq
[ 2.016121] tsc: Refined TSC clocksource calibration: 2127.985 MHz
[ 2.675868] thermal LNXTHERM:00: registered as thermal_zone0
[ 2.675871] ACPI: Thermal Zone [TZS0] (38 C)
[ 2.686874] thermal LNXTHERM:01: registered as thermal_zone1
[ 2.686876] ACPI: Thermal Zone [TZS1] (21 C)
[ 2.686912] GHES: HEST is not enabled!
[ 2.686940] ACPI: Battery Slot [BAT0] (battery absent)
[ 2.686989] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 2.687553] Non-volatile memory driver v1.3
[ 2.687556] Linux agpgart interface v0.103
[ 2.688394] loop: module loaded
[ 2.688455] ahci 0000:00:1f.2: version 3.0
[ 2.688620] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
[ 2.688658] ahci: SSS flag set, parallel bus scan disabled
[ 2.698840] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
[ 2.698844] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst
[ 2.698848] ahci 0000:00:1f.2: setting latency timer to 64
[ 2.705200] scsi0 : ahci
[ 2.705276] scsi1 : ahci
[ 2.705339] scsi2 : ahci
[ 2.705399] scsi3 : ahci
[ 2.705456] scsi4 : ahci
[ 2.705516] scsi5 : ahci
[ 2.705557] ata1: SATA max UDMA/133 abar m2048@0xf0608000 port 0xf0608100 irq 41
[ 2.705560] ata2: SATA max UDMA/133 abar m2048@0xf0608000 port 0xf0608180 irq 41
[ 2.705561] ata3: DUMMY
[ 2.705562] ata4: DUMMY
[ 2.705564] ata5: SATA max UDMA/133 abar m2048@0xf0608000 port 0xf0608300 irq 41
[ 2.705566] ata6: SATA max UDMA/133 abar m2048@0xf0608000 port 0xf0608380 irq 41
[ 2.705642] libphy: Fixed MDIO Bus: probed
[ 2.705706] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.705708] ehci-pci: EHCI PCI platform driver
[ 2.705853] ehci-pci 0000:00:1a.0: setting latency timer to 64
[ 2.705865] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 2.705926] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 2.705939] ehci-pci 0000:00:1a.0: debug port 2
[ 2.709889] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 2.709905] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf0606000
[ 2.715812] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 2.715834] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.715836] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.715838] usb usb1: Product: EHCI Host Controller
[ 2.715840] usb usb1: Manufacturer: Linux 3.11.3-201.fc19.x86_64 ehci_hcd
[ 2.715842] usb usb1: SerialNumber: 0000:00:1a.0
[ 2.715963] hub 1-0:1.0: USB hub found
[ 2.715968] hub 1-0:1.0: 3 ports detected
[ 2.716180] ehci-pci 0000:00:1d.0: setting latency timer to 64
[ 2.716187] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 2.716243] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 2.716255] ehci-pci 0000:00:1d.0: debug port 2
[ 2.720208] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 2.720223] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf0607000
[ 2.725809] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 2.725822] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.725824] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.725826] usb usb2: Product: EHCI Host Controller
[ 2.725828] usb usb2: Manufacturer: Linux 3.11.3-201.fc19.x86_64 ehci_hcd
[ 2.725830] usb usb2: SerialNumber: 0000:00:1d.0
[ 2.725927] hub 2-0:1.0: USB hub found
[ 2.725931] hub 2-0:1.0: 3 ports detected
[ 2.726018] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.726020] ohci-pci: OHCI PCI platform driver
[ 2.726028] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.726083] usbcore: registered new interface driver usbserial
[ 2.726091] usbcore: registered new interface driver usbserial_generic
[ 2.726098] usbserial: USB Serial support registered for generic
[ 2.726128] i8042: PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 2.740786] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.740798] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.740888] mousedev: PS/2 mouse device common for all mice
[ 2.741498] rtc_cmos 00:05: RTC can wake from S4
[ 2.741630] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 2.741657] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 2.741729] device-mapper: uevent: version 1.0.3
[ 2.741807] device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: dm-devel@redhat.com
[ 2.741919] cpuidle: using governor menu
[ 2.742262] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.742339] usbcore: registered new interface driver usbhid
[ 2.742341] usbhid: USB HID core driver
[ 2.742393] drop_monitor: Initializing network drop monitor service
[ 2.742483] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 2.742514] TCP: cubic registered
[ 2.742517] Initializing XFRM netlink socket
[ 2.742623] NET: Registered protocol family 10
[ 2.742834] mip6: Mobile IPv6
[ 2.742837] NET: Registered protocol family 17
[ 2.743142] PM: Hibernation image not present or could not be loaded.
[ 2.743146] Loading compiled-in X.509 certificates
[ 2.744291] Loaded X.509 cert 'Fedora kernel signing key: b4d31099b297a2c0d76d8fabbd20a9597369c206'
[ 2.744302] registered taskstats version 1
[ 2.744857] Magic number: 1:411:468
[ 2.744973] rtc_cmos 00:05: setting system clock to 2013-10-11 06:29:33 UTC (1381472973)
[ 2.767598] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 3.012767] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.015025] ata1.00: ATA-8: WDC WD5000BEVT-22A0RT0, 01.01A01, max UDMA/133
[ 3.015030] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 3.016019] Switched to clocksource tsc
[ 3.017522] ata1.00: configured for UDMA/133
[ 3.017777] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 3.017877] scsi 0:0:0:0: Direct-Access ATA WDC WD5000BEVT-2 01.0 PQ: 0 ANSI: 5
[ 3.018088] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.018118] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 3.018339] sd 0:0:0:0: [sda] Write Protect is off
[ 3.018346] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.018488] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.057228] sda: sda1 sda2
[ 3.058602] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.132093] usb 1-1: New USB device found, idVendor=8087, idProduct=0020
[ 3.132098] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.132500] hub 1-1:1.0: USB hub found
[ 3.132720] hub 1-1:1.0: 6 ports detected
[ 3.235630] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 3.322627] ata2: SATA link down (SStatus 0 SControl 300)
[ 3.350265] usb 2-1: New USB device found, idVendor=8087, idProduct=0020
[ 3.350270] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.350641] hub 2-1:1.0: USB hub found
[ 3.350866] hub 2-1:1.0: 8 ports detected
[ 3.626670] usb 2-1.3: new low-speed USB device number 3 using ehci-pci
[ 3.627455] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.646704] ata5.00: ATAPI: TSSTcorp CDDVDW TS-L633C, AC01, max UDMA/100
[ 3.646710] ata5.00: applying bridge limits
[ 3.665020] ata5.00: configured for UDMA/100
[ 3.669112] scsi 4:0:0:0: CD-ROM TSSTcorp CDDVDW TS-L633C AC01 PQ: 0 ANSI: 5
[ 3.676405] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 3.676412] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 3.676703] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 3.676881] sr 4:0:0:0: Attached scsi generic sg1 type 5
[ 3.713994] usb 2-1.3: New USB device found, idVendor=062a, idProduct=0000
[ 3.714002] usb 2-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.716408] input: HID 062a:0000 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input4
[ 3.716789] hid-generic 0003:062A:0000.0001: input,hidraw0: USB HID v1.10 Mouse [HID 062a:0000] on usb-0000:00:1d.0-1.3/input0
[ 3.755816] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa44000/0xa0000, board id: 3655, fw id: 529512
[ 3.789608] usb 2-1.5: new high-speed USB device number 4 using ehci-pci
[ 3.811061] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
[ 3.915140] usb 2-1.5: New USB device found, idVendor=064e, idProduct=a103
[ 3.915148] usb 2-1.5: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[ 3.915154] usb 2-1.5: Product: Video WebCam
[ 3.915158] usb 2-1.5: Manufacturer: SuYin
[ 3.915162] usb 2-1.5: SerialNumber: CN0314-SN30-OV035-VA-R05.00.00
[ 3.981347] ata6: SATA link down (SStatus 0 SControl 300)
[ 3.982714] Freeing unused kernel memory: 1420K (ffffffff81cf9000 - ffffffff81e5c000)
[ 3.982718] Write protecting the kernel read-only data: 12288k
[ 3.987135] Freeing unused kernel memory: 1672K (ffff88000165e000 - ffff880001800000)
[ 3.990132] Freeing unused kernel memory: 1228K (ffff880001acd000 - ffff880001c00000)
[ 3.997686] systemd[1]: systemd 204 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
[ 3.997924] systemd[1]: Running in initial RAM disk.
[ 3.998188] systemd[1]: Set hostname to .
[ 4.006396] systemd[1]: Expecting device dev-mapper-vg_skywalker\x2dlv_swap.device...
[ 4.006411] systemd[1]: Expecting device dev-mapper-vg_skywalker\x2dlv_root.device...
[ 4.006423] systemd[1]: Expecting device dev-disk-by\x2duuid-e99f4aed\x2d508a\x2d4d4d\x2da87f\x2da90dff3b30bc.device...
[ 4.006432] systemd[1]: Starting Timers.
[ 4.006445] systemd[1]: Reached target Timers.
[ 4.006510] systemd[1]: Starting udev Kernel Socket.
[ 4.006543] systemd[1]: Listening on udev Kernel Socket.
[ 4.006595] systemd[1]: Starting udev Control Socket.
[ 4.006628] systemd[1]: Listening on udev Control Socket.
[ 4.006640] systemd[1]: Starting Journal Socket.
[ 4.006690] systemd[1]: Listening on Journal Socket.
[ 4.006880] systemd[1]: Starting dracut cmdline hook...
[ 4.007499] systemd[1]: Started Load Kernel Modules.
[ 4.007513] systemd[1]: Starting Sockets.
[ 4.007527] systemd[1]: Reached target Sockets.
[ 4.007537] systemd[1]: Starting Journal Service...
[ 4.007956] systemd[1]: Started Journal Service.
[ 4.008199] systemd[1]: Starting Swap.
[ 4.008228] systemd[1]: Reached target Swap.
[ 4.008266] systemd[1]: Starting Local File Systems.
[ 4.008281] systemd[1]: Reached target Local File Systems.
[ 4.268835] systemd-udevd[165]: starting version 204
[ 5.013176] bio: create slab at 1
[ 5.503699] EXT4-fs (dm-0): INFO: recovery required on readonly filesystem
[ 5.503707] EXT4-fs (dm-0): write access will be enabled during recovery
[ 8.175169] EXT4-fs (dm-0): recovery complete
[ 8.196808] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[ 8.374004] systemd-journald[77]: Received SIGTERM
[ 9.156179] type=1404 audit(1381472979.913:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
[ 9.679048] SELinux: 2048 avtab hash slots, 95643 rules.
[ 9.721803] SELinux: 2048 avtab hash slots, 95643 rules.
[ 10.364212] SELinux: 8 users, 82 roles, 4547 types, 259 bools, 1 sens, 1024 cats
[ 10.364221] SELinux: 83 classes, 95643 rules
[ 10.377820] SELinux: Completing initialization.
[ 10.377825] SELinux: Setting up existing superblocks.
[ 10.377838] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
[ 10.377848] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
[ 10.377863] SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
[ 10.377874] SELinux: initialized (dev proc, type proc), uses genfs_contexts
[ 10.377889] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 10.377916] SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
[ 10.379780] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
[ 10.379790] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
[ 10.381022] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
[ 10.381036] SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
[ 10.381051] SELinux: initialized (dev devpts, type devpts), uses transition SIDs
[ 10.381090] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
[ 10.381104] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
[ 10.381119] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
[ 10.381139] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
[ 10.381657] SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts
[ 10.381662] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 10.381677] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 10.381866] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 10.381940] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 10.381953] SELinux: initialized (dev pstore, type pstore), uses genfs_contexts
[ 10.381957] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 10.381967] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 10.382001] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 10.382013] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 10.382020] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 10.382027] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 10.382034] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 10.382047] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 10.382061] SELinux: initialized (dev dm-0, type ext4), uses xattr
[ 10.398854] type=1403 audit(1381472981.156:3): policy loaded auid=4294967295 ses=4294967295
[ 10.409963] systemd[1]: Successfully loaded SELinux policy in 1.280160s.
[ 10.728263] systemd[1]: Relabelled /dev and /run in 44.419ms.
[ 11.642908] LVM: Logical Volume autoactivation enabled.
[ 11.642919] LVM: Activation generator successfully completed.
[ 13.535282] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
[ 13.718846] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
[ 14.047562] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 14.335211] SELinux: initialized (dev configfs, type configfs), uses genfs_contexts
[ 15.180105] systemd-udevd[341]: starting version 204
[ 15.386153] EXT4-fs (dm-0): re-mounted. Opts: (null)
[ 15.652954] SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
[ 15.821326] acpi device:03: registered as cooling_device4
[ 15.821382] ACPI: Video Device [PEGP] (multi-head: yes rom: no post: no)
[ 15.821438] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input6
[ 15.978263] ACPI Warning: 0x0000000000001840-0x000000000000185f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20130517/utaddress-251)
[ 15.978273] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 15.983206] microcode: CPU0 sig=0x20652, pf=0x10, revision=0x8
[ 16.104089] wmi: Mapper loaded
[ 16.112156] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 16.409811] media: Linux media interface: v0.10
[ 16.422672] Linux video capture interface: v2.00
[ 16.424674] AMD IOMMUv2 driver by Joerg Roedel
[ 16.424679] AMD IOMMUv2 functionality not available on this system
[ 16.429213] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20130517/utaddress-251)
[ 16.429222] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 16.429226] ACPI Warning: 0x00000000000011c0-0x00000000000011cf SystemIO conflicts with Region \GPIO 1 (20130517/utaddress-251)
[ 16.429231] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 16.429233] ACPI Warning: 0x00000000000011b0-0x00000000000011bf SystemIO conflicts with Region \GPIO 1 (20130517/utaddress-251)
[ 16.429237] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 16.429239] ACPI Warning: 0x0000000000001180-0x00000000000011af SystemIO conflicts with Region \GPIO 1 (20130517/utaddress-251)
[ 16.429244] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 16.429246] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 16.441157] mei_me 0000:00:16.0: setting latency timer to 64
[ 16.441203] mei_me 0000:00:16.0: irq 42 for MSI/MSI-X
[ 16.593697] intel ips 0000:00:1f.6: CPU TDP doesn't match expected value (found 25, expected 29)
[ 16.594021] intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled until i915 loads
[ 16.594185] intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 90
[ 16.604097] pps_core: LinuxPPS API ver. 1 registered
[ 16.604100] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
[ 16.605635] PTP clock support registered
[ 16.634310] tg3.c:v3.132 (May 21, 2013)
[ 16.671876] libphy: tg3 mdio bus: probed
[ 16.677392] tg3 0000:03:00.0 eth0: Tigon3 [partno(BCM57780) rev 57780001] (PCI Express) MAC address 00:26:2d:94:13:c8
[ 16.677396] tg3 0000:03:00.0 eth0: attached PHY driver [Broadcom BCM57780] (mii_bus:phy_addr=300:01)
[ 16.677399] tg3 0000:03:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 16.677401] tg3 0000:03:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 16.845530] cfg80211: Calling CRDA to update world regulatory domain
[ 16.922749] microcode: CPU0 sig=0x20652, pf=0x10, revision=0x8
[ 16.923503] microcode: CPU0 updated to revision 0xe, date = 2013-06-26
[ 16.923580] microcode: CPU1 sig=0x20652, pf=0x10, revision=0x8
[ 16.923616] microcode: CPU1 sig=0x20652, pf=0x10, revision=0x8
[ 16.923928] microcode: CPU1 updated to revision 0xe, date = 2013-06-26
[ 16.923945] microcode: CPU2 sig=0x20652, pf=0x10, revision=0x8
[ 16.923976] microcode: CPU2 sig=0x20652, pf=0x10, revision=0x8
[ 16.924307] microcode: CPU2 updated to revision 0xe, date = 2013-06-26
[ 16.924367] microcode: CPU3 sig=0x20652, pf=0x10, revision=0x8
[ 16.924412] microcode: CPU3 sig=0x20652, pf=0x10, revision=0x8
[ 16.924856] microcode: CPU3 updated to revision 0xe, date = 2013-06-26
[ 16.924936] microcode: Microcode Update Driver: v2.00 , Peter Oruba
[ 17.004875] uvcvideo: Found UVC 1.00 device Video WebCam (064e:a103)
[ 17.021495] input: Video WebCam as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input7
[ 17.021654] usbcore: registered new interface driver uvcvideo
[ 17.021656] USB Video Class driver (1.1.1)
[ 17.136643] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 17.136649] Disabling lock debugging due to kernel taint
[ 17.141523] fglrx: module verification failed: signature and/or required key missing - tainting kernel
[ 17.148072] <6>[fglrx] Maximum main memory to use for locked dma buffers: 3657 MBytes.
[ 17.148273] <6>[fglrx] vendor: 1002 device: 68e0 count: 1
[ 17.148550] <6>[fglrx] ioport: bar 4, base 0x2000, size: 0x100
[ 17.148832] <6>[fglrx] Kernel PAT support is enabled
[ 17.148855] <6>[fglrx] module loaded - fglrx 13.15.3 [Aug 30 2013] with 1 minors
[ 17.163950] iTCO_vendor_support: vendor-support=0
[ 17.165446] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 17.165484] iTCO_wdt: Found a HM55 TCO device (Version=2, TCOBASE=0x0460)
[ 17.165959] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 17.296592] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[ 17.312975] acer_wmi: Acer Laptop ACPI-WMI Extras
[ 17.317416] ALSA sound/pci/hda/patch_realtek.c:418 SKU: Nid=0x1d sku_cfg=0x40178d2d
[ 17.317420] ALSA sound/pci/hda/patch_realtek.c:420 SKU: port_connectivity=0x1
[ 17.317421] ALSA sound/pci/hda/patch_realtek.c:421 SKU: enable_pcbeep=0x1
[ 17.317423] ALSA sound/pci/hda/patch_realtek.c:422 SKU: check_sum=0x00000007
[ 17.317424] ALSA sound/pci/hda/patch_realtek.c:423 SKU: customization=0x0000008d
[ 17.317426] ALSA sound/pci/hda/patch_realtek.c:424 SKU: external_amp=0x5
[ 17.317427] ALSA sound/pci/hda/patch_realtek.c:425 SKU: platform_type=0x1
[ 17.317429] ALSA sound/pci/hda/patch_realtek.c:426 SKU: swap=0x0
[ 17.317430] ALSA sound/pci/hda/patch_realtek.c:427 SKU: override=0x1
[ 17.317725] ALSA sound/pci/hda/hda_auto_parser.c:393 autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 17.317729] ALSA sound/pci/hda/hda_auto_parser.c:397 speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 17.317731] ALSA sound/pci/hda/hda_auto_parser.c:401 hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 17.317732] ALSA sound/pci/hda/hda_auto_parser.c:402 mono: mono_out=0x0
[ 17.317734] ALSA sound/pci/hda/hda_auto_parser.c:405 dig-out=0x1e/0x0
[ 17.317735] ALSA sound/pci/hda/hda_auto_parser.c:406 inputs:
[ 17.317738] ALSA sound/pci/hda/hda_auto_parser.c:410 Internal Mic=0x19
[ 17.317739] ALSA sound/pci/hda/hda_auto_parser.c:410 Mic=0x18
[ 17.317741] ALSA sound/pci/hda/hda_auto_parser.c:410 Line=0x1a
[ 17.317743] ALSA sound/pci/hda/patch_realtek.c:490 realtek: No valid SSID, checking pincfg 0x40178d2d for NID 0x1d
[ 17.317745] ALSA sound/pci/hda/patch_realtek.c:506 realtek: Enabling init ASM_ID=0x8d2d CODEC_ID=10ec0272
[ 17.319881] acer_wmi: Function bitmap for Communication Device: 0x88
[ 17.322001] ALSA sound/pci/hda/hda_auto_parser.c:393 autoconfig: line_outs=0 (0x0/0x0/0x0/0x0/0x0) type:line
[ 17.322005] ALSA sound/pci/hda/hda_auto_parser.c:397 speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 17.322007] ALSA sound/pci/hda/hda_auto_parser.c:401 hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 17.322009] ALSA sound/pci/hda/hda_auto_parser.c:402 mono: mono_out=0x0
[ 17.322010] ALSA sound/pci/hda/hda_auto_parser.c:406 inputs:
[ 17.332516] input: HDA Intel MID Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 17.332674] input: HDA Intel MID Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 17.332779] input: HDA Intel MID Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 17.337656] systemd-udevd[379]: renamed network interface eth0 to p7p1
[ 17.342290] ALSA sound/pci/hda/hda_intel.c:3116 0000:02:00.1: Handle VGA-switcheroo audio client
[ 17.342297] ALSA sound/pci/hda/hda_intel.c:3317 0000:02:00.1: Using LPIB position fix
[ 17.342348] snd_hda_intel 0000:02:00.1: irq 44 for MSI/MSI-X
[ 17.342998] acer_wmi: Brightness must be controlled by acpi video driver
[ 17.343229] input: Acer BMA150 accelerometer as /devices/virtual/input/input11
[ 17.344808] ALSA sound/pci/hda/hda_intel.c:1787 0000:02:00.1: Enable sync_write for stable communication
[ 17.353299] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:02:00.1/sound/card1/input12
[ 17.432005] cfg80211: World regulatory domain updated:
[ 17.432010] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 17.432012] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 17.432014] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 17.432016] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 17.432017] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 17.432019] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 17.762426] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
[ 17.792289] ath: EEPROM regdomain: 0x65
[ 17.792293] ath: EEPROM indicates we should expect a direct regpair map
[ 17.792295] ath: Country alpha2 being used: 00
[ 17.792297] ath: Regpair used: 0x65
[ 17.847322] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 17.847691] ieee80211 phy0: Atheros AR9280 Rev:2 mem=0xffffc900107c0000, irq=17
[ 17.858490] systemd-udevd[373]: renamed network interface wlan0 to wlp5s0
[ 18.017616] cfg80211: Calling CRDA for country: IT
[ 18.019546] cfg80211: Regulatory domain changed to country: IT
[ 18.019550] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 18.019552] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 18.019554] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 18.019556] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 18.019557] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
[ 18.019559] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
[ 20.010842] Adding 5996540k swap on /dev/mapper/vg_skywalker-lv_swap. Priority:-1 extents:1 across:5996540k FS
[ 23.772490] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 24.105548] SELinux: initialized (dev sda1, type ext4), uses xattr
[ 24.246004] type=1305 audit(1381472995.009:4): audit_pid=526 old=0 auid=4294967295 ses=4294967295
subj=system_u:system_r:auditd_t:s0 res=1
[ 24.354402] systemd[1]: Unit rngd.service entered failed state.
[ 24.891367] vboxdrv: Found 4 processor cores.
[ 24.891935] vboxdrv: fAsync=0 offMin=0x1f4 offMax=0xc6c
[ 24.892019] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 24.892022] vboxdrv: Successfully loaded version 4.2.18 (interface 0x001a0005).
[ 25.036831] systemd-journald[339]: File /var/log/journal/cb50e8a1e81549e38cee2db87cb98c5b/system.journal corrupted or uncleanly shut down, renaming and replacing.
[ 25.091606] systemd-logind[560]: Watching system buttons on /dev/input/event2 (Power Button)
[ 25.091758] systemd-logind[560]: Watching system buttons on /dev/input/event6 (Video Bus)
[ 25.091891] systemd-logind[560]: Watching system buttons on /dev/input/event0 (Lid Switch)
[ 25.092025] systemd-logind[560]: Watching system buttons on /dev/input/event1 (Sleep Button)
[ 25.105367] vboxpci: IOMMU not found (not registered)
[ 25.224359] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 25.235960] Ebtables v2.0 registered
[ 25.289308] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 38.740949] tg3 0000:03:00.0: irq 45 for MSI/MSI-X
[ 38.752078] IPv6: ADDRCONF(NETDEV_UP): p7p1: link is not ready
[ 38.775688] IPv6: ADDRCONF(NETDEV_UP): wlp5s0: link is not ready
[ 38.825432] tg3 0000:03:00.0 p7p1: Link is down
[ 38.877112] Bluetooth: Core ver 2.16
[ 38.877237] NET: Registered protocol family 31
[ 38.877239] Bluetooth: HCI device and connection manager initialized
[ 38.877269] Bluetooth: HCI socket layer initialized
[ 38.877274] Bluetooth: L2CAP socket layer initialized
[ 38.877281] Bluetooth: SCO socket layer initialized
[ 38.973972] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 38.973978] Bluetooth: BNEP filters: protocol multicast
[ 38.973993] Bluetooth: BNEP socket layer initialized
[ 42.060194] wlp5s0: authenticate with a4:52:6f:d9:6a:2f
[ 42.092069] wlp5s0: send auth to a4:52:6f:d9:6a:2f (try 1/3)
[ 42.094067] wlp5s0: authenticated
[ 42.094920] wlp5s0: associate with a4:52:6f:d9:6a:2f (try 1/3)
[ 42.098649] wlp5s0: RX AssocResp from a4:52:6f:d9:6a:2f (capab=0x411 status=0 aid=4)
[ 42.098724] wlp5s0: associated
[ 42.098760] IPv6: ADDRCONF(NETDEV_CHANGE): wlp5s0: link becomes ready
[ 43.589258] fglrx_pci 0000:02:00.0: irq 46 for MSI/MSI-X
[ 43.590315] <6>[fglrx] Firegl kernel thread PID: 1586
[ 43.590576] <6>[fglrx] Firegl kernel thread PID: 1587
[ 43.590762] <6>[fglrx] Firegl kernel thread PID: 1588
[ 43.591010] <6>[fglrx] IRQ 46 Enabled
[ 43.612607] <6>[fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 43.612610] <6>[fglrx] Reserved FB block: Unshared offset:f8ca000, size:436000
[ 43.612612] <6>[fglrx] Reserved FB block: Unshared offset:1fff4000, size:c000
[ 66.929309] fuse init (API version 7.22)
[ 66.953470] SELinux: initialized (dev fusectl, type fusectl), uses genfs_contexts
[ 66.969842] SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
[ 763.824678] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
[ 763.824693] SELinux: initialized (dev dm-2, type ext4), uses xattr
[ 1282.630896] nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.
[ 2171.738680] perf samples too long (2517 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
[ 2861.272648] usb 2-1.3: USB disconnect, device number 3
[ 2861.468607] usb 2-1.3: new low-speed USB device number 5 using ehci-pci
[ 2861.545801] usb 2-1.3: New USB device found, idVendor=062a, idProduct=0000
[ 2861.545809] usb 2-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2861.549793] input: HID 062a:0000 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input13
[ 2861.550595] hid-generic 0003:062A:0000.0002: input,hidraw0: USB HID v1.10 Mouse [HID 062a:0000] on usb-0000:00:1d.0-1.3/input0
[skywalker@localhost ~]$

Nemmeno con il comando dmesg appaiono moduli catalyst.
Credo il problema sia quello.
Avete qualche altra idea e soluzione?
Grazie. Lang